M4-ATX Enclosure

SFX/ATX enclosure for M4-ATX (sold separately) designed to replace regular ATX PSUs.

In most cases, fan is not required, however this kit includes a 60mm fan. Solder it to either 12V rail or 5V output for low speed, low RPM, quiet operation. J3 is designated pin header for fan (see below).

Solder the fan terminals as shown in the picture on the right (click to zoom) or connect to J3. Recommended settings: GND and 5V

NOTE: Starting 04/04/09 the fan header, J3, supplies 5V instead of 12V. We recommend connecting your fan terminals to J3 for quiet, low speed operation.