FSP300 300W ATX power supply

The FSP300 is a powerful standard desktop ATX power supply. It features several connectors for all of your peripherals and fits any motherboard equipped with a 20 or 24 pin ATX connector.

Input Specifications:

Voltage -- Full Range Input
Frequency -- 47Hz - 63Hz.
Input current -- 4.0 amps maximum / 115 Vrms; 2.0 amps maximum / 230 Vrms.

Output Specifications
Over-voltage protection -- +12V : 15.6V(maximum); +5V : 7.0V (maximum); +3.3V : 4.8V (maximum)
Over-current protection -- +3.3V : 45A maximum; +5V : 45A maximum; +12V1 DC : 22A maximum; +12V2 DC : 22A maximum.
Remote ON/OFF control -- The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby).
Power good signal -- 115/230V (full load) 100 - 500 ms

General Specifications
Efficiency -- 75% / 115V; 78% / 230V.
Hold-up time -- 17.0 ms minimum: at 115V / 60 Hz; 17.0 ms minimum: at 230V / 50 Hz.

Environmental Specifications
Operating conditions -- ambient temperature 0°C~+50°C
Storage and shipping conditions -- ambient temperature -20C+80C
Dielectric withstand -- input / output 1800 VAC for 1 second, input to frame ground 1800VAC for 1 second

Output
Output Voltage: +5Vsb, Min. load: 0.0A, Max. load: 2.0A , Load Reg: ±5%, Ripple & Noise: 50mV P-P
Output Voltage: -12V, Min. load: 0.0A, Max. load: 0.5A , Load Reg: ±10%, Ripple & Noise: 120mV P-P
Output Voltage:+12V2, Min. load: 1.0A, Max. load: 14.5A , Load Reg: ±5%, Ripple & Noise: 120mV P-P
Output Voltage: +12V1, Min. load: 1.0A, Max. load: 8A , Load Reg: ±5%, Ripple & Noise: 120mV P-P
Output Voltage: +5V, Min. load: 0.3A, Max. load: 18A , Load Reg: ±5%, Ripple & Noise: 50mV P-P
Output Voltage: +3.3V, Min. load: 0.5A, Max. load: 18A , Load Reg: ±5%, Ripple & Noise: 50mV P-P

• Extend the length of power connection from the power supply to the motherboard
• Works with the PW-200 series and picoPSU series
• Length: 9"(230mm)